
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 65 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X85-20B is a double-acting compact cylinder featuring a male-threaded M22x1.5 piston rod and an external extend stop. Its short riveted body saves axial mounting depth where round-body or profile cylinders will not fit.
By turning the R (M20x1.5) adjuster screw, you shorten the forward stroke on-site across a 65 to 85 mm window without changing parts. The theoretical maximum push is 513 kgf at 1.0 MPa. End shock is handled by a fixed NBR bumper that decelerates the stroke end, rather than an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 85 mm |
| Adjustable range | 65 – 85 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fit the compact riveted body into tight machine cells where axial depth is restricted, using the male M22x1.5 rod to drive forming tools at 0.5 MPa.
Adjust the forward stop without shims during product changeover, relying on the fixed NBR bumper to absorb the end shock of the 25 mm rod.
Choose this unit if your setup-heavy line requires on-site stroke tuning across the 65-85 mm range.
Confirm the 80 mm bore, 85 mm max stroke, 20 mm window, PT3/8 port, and the male M22x1.5 rod thread. This SKU lacks a piston magnet, so it cannot accept magnetic switches; specify the -S variant if you need reed or electronic sensing. Remember that a plain cylinder does not hold its load on air loss or valve centering—the piston drifts and the bumper only decelerates near the end. For a held load, install an external rod lock or a pilot-operated check valve.
Quick checklist
Turning the external R (M20x1.5) screw mechanically shortens the extend stop from the 85 mm maximum down to 65 mm without changing parts. This sets the stop position only; it does not alter force or act as a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.