
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 65 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X85-20S is a compact double-acting double-rod cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop between 65 and 85 mm directly on your machine. Retract travel stays full length.
Its short riveted body drastically cuts axial mounting depth where round-body or larger profile units cannot fit. The piston rod measures 25 mm in diameter, and an integrated magnet (-S) enables position sensing with AirTAC reed or electronic switches. End shock is managed solely by a fixed NBR bumper, meaning the stop is not an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 85 mm |
| Adjustable range | 65 – 85 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 65-85 mm extend stop on a 2513.3 N press to perfect the crush depth on varying material batches without swapping mechanical shims.
Fit the compact riveted body into tight machine frames to deliver 513 kgf maximum push force where standard longer cylinders cannot fit axially.
Choose it when setup requires on-site stroke tuning between 65 and 85 mm.
Confirm the bore, 85 mm maximum stroke, 20 mm window, PT3/8 port, and the built-in magnet for reed or electronic sensing. The rod-end thread is female M14x1.5 unless specified otherwise. Note that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa.
The external M20x1.5 screw shortens the extend end-position by up to 20 mm, giving a usable extend range of 65 to 85 mm without changing the force. The -S code indicates a built-in piston magnet for position feedback using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.