
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-30B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X85-30B is a compact double-acting double-rod cylinder built for heavy-duty positioning where the extend end-point must be dialed in on the machine. An external M20x1.5 adjuster screw lets you shorten the forward stroke by up to 30 mm, yielding a usable extend range of 55 to 85 mm without swapping shims or parts.
This model features a male-thread M22x1.5 piston rod end and a PT3/8 air port. Its short riveted body saves axial mounting depth where a larger profile cylinder will not fit, while a fixed NBR bumper at each end decelerates the stroke end. Note that this bumper is not an adjustable air cushion, and the adjuster acts as a stop rather than a mid-stroke lock.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 85 mm |
| Adjustable range | 55 – 85 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Position parts on high-force assembly lines where the 80 mm bore bridges the gap between the 63 mm and 100 mm variants, tuning the forward stroke locally to match fixture variations.
Choose this 80 mm bore when your application demands high force but still requires fine-tuning the extend position during setup or changeover.
Confirm the 85 mm maximum stroke, 30 mm adjustment window, PT3/8 port, and the male M22x1.5 rod thread for your mounting interface. This SKU lacks a piston magnet, so it cannot accept reed or electronic switches; select the -S variant if sensing is required. Remember that a standard double-acting cylinder drifts when air is lost or the valve is centered—the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The external adjuster sets the stop position without altering these force outputs.
The M20x1.5 adjuster screw mechanically shortens the extend stroke by up to 30 mm, providing an end-position range of 55 to 85 mm. This specific SKU has no piston magnet and cannot accept switches; you must select an -S option code to use AirTAC reed or electronic sensors in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.