
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-30SB is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X85-30SB is a compact double-acting double-rod cylinder engineered with an external extend stop. By turning the R (M20x1.5) adjuster screw, you can dial the forward stroke down by up to 30 mm directly at the machine, yielding a precise usable extension window of 55 to 85 mm without swapping shims or parts.
This 80 mm bore unit features a short riveted body that drastically reduces axial mounting depth compared to round-body alternatives, fitting easily into cramped machine footprints. The piston rod measures 25 mm in diameter, and this specific configuration includes the -B option for a male M22x1.5 threaded rod end. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, and the included -S magnet enables position sensing via AirTAC reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 85 mm |
| Adjustable range | 55 – 85 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical extend stop quickly during product changeovers on multi-format assembly lines, using the M20x1.5 screw to set new end positions without changing hardware.
Choose this specific cylinder if your fixture requires on-site stroke tuning during frequent changeovers or trial positioning.
Confirm the 85 mm maximum stroke with the 30 mm adjustment window, the PT3/8 air port, and the built-in magnet (-S). Note the male M22x1.5 rod thread (-B) for your mounting interface. A plain double-acting cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift, and the fixed NBR bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 513 kgf at 1.0 MPa. The adjustable stop does not alter these force values.
The R (M20x1.5) screw shortens the extend stroke by up to 30 mm, allowing you to set the forward stop anywhere between 55 and 85 mm; retract remains full stroke. The built-in -S magnet allows tracking via AirTAC reed or electronic switches, and the male M22x1.5 rod end handles the load interface.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.