verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40S

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke85 mm
  • Adjustable range45–85 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$157.49 $164.99Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40S

The AirTAC SDAJ80X85-40S is a double-acting compact cylinder featuring an external adjustable extend stop. An M20x1.5 adjuster screw lets you dial the extend position anywhere between 45 and 85 mm directly on the machine, avoiding part swaps. Retract travel remains full length.

The short riveted body saves axial mounting depth in tight spaces, while the fixed NBR bumpers absorb end-of-stroke shock. This unit includes a built-in magnet for AirTAC reed or electronic switches.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40S Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke85 mm
Adjustable range45 – 85 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40S

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×85Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40S Is Used

precision_manufacturing

Heavy Press Fitments

Dial in the 45-85 mm extend stop during initial tooling setup to precisely seat heavy bearings without cycling through manual shims.

vertical_align_center

Pallet Lift Stops

Fine-tune the lift height within the 40 mm window to match different pallet thicknesses, relying on the fixed NBR bumper to absorb the load shock.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40S the Right Cylinder?

This SDAJ80X85-40S sits comfortably in the middle, offering a theoretical maximum of 513 kgf at 1.0 MPa.

Choose this specific configuration if your fixture requires frequent on-site stroke tuning across its 40 mm window. It uses a PT3/8 port and a 25 mm rod with a female M14x1.5 thread. The -S magnet enables position sensing. Remember that a plain cylinder drifts on air loss; for vertical load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40S FAQ

The theoretical maximum push force is 513 kgf at 1.0 MPa.

The M20x1.5 screw shortens the extend stroke by up to 40 mm, yielding a 45-85 mm usable range without changing the output force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X85-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.