verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-75S

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-75S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke85 mm
  • Adjustable range10–85 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$157.49 $164.99Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-75S

The AirTAC SDAJ80X85-75S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M20x1.5 adjuster screw lets you dial the forward end-position anywhere between 10 and 85 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.

This 80 mm bore actuator uses a PT3/8 air port and a 25 mm piston rod to handle substantial loads. The short riveted body saves valuable axial mounting depth where a larger profile cylinder would not fit. End-of-travel shock is managed by a fixed NBR bumper, which decelerates the piston near the end of the stroke but is not an adjustable air cushion. The integrated magnet (-S) supports position sensing using AirTAC reed or electronic switches.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-75S Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-75S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke85 mm
Adjustable range10 – 85 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-75S

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×85Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-75S the Right Cylinder?

Stepping down to the SDAJ63 provides 1558.6 N, whereas moving up to the SDAJ100 yields 3927 N. Choose this 80 mm bore when your application requires that intermediate force level alongside on-site stroke tuning.

This actuator is ideal for operators needing frequent trial positioning or setup adjustments without changing hardware. Confirm your requirements for an 80 mm bore, 85 mm maximum stroke, 75 mm adjust window, PT3/8 port, built-in magnet, and female rod-end thread. Note that a plain cylinder does not hold position or load when air is lost or the valve is centered; the fixed bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For load holding without live pressure, utilize an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-75S FAQ

The M20x1.5 screw shortens the extend stroke by up to 75 mm, giving a usable range of 10-85 mm without changing force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X85-75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.