
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-75SB is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X85-75SB is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop anywhere between 10 and 85 mm on-site. The short riveted body drastically reduces axial mounting depth where a larger profile cylinder would fail to fit.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches, alongside a male M22x1.5 threaded piston rod for secure external mounting. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 85 mm |
| Adjustable range | 10 – 85 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 85 mm to set precise pressing depth for heavy 128 kg assemblies without machining new spacers.
Adjust the M20x1.5 screw on-site to tune the 2513.3 N extend force for sealing varied carton heights during rapid format changeovers.
Lift components to specific intermediate heights using the male M22x1.5 rod, relying on the mechanical stop rather than complex valving.
Choose this model if your fixture requires frequent on-machine stroke tuning without part swaps.
Confirm the 85 mm maximum stroke, 75 mm adjustment window, and PT3/8 air port match your pneumatic supply. The male M22x1.5 rod end and integrated magnet are active options. Remember that a plain cylinder does not hold position upon air loss; the fixed bumper only decelerates near the end of travel. For suspended loads, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa.
The external M20x1.5 screw shortens the extend stroke by up to 75 mm, yielding a usable 10-85 mm range. The integrated magnet works with AirTAC reed or electronic switches for position sensing, while the fixed NBR bumper handles end shock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.