
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X90-10 is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that lets you dial the extend stop anywhere between 80 and 90 mm directly at the machine.
Its short riveted body drastically cuts axial mounting depth where a larger profile cylinder will not fit, while end-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Operating speed spans 30-500 mm/s, and this specific SKU ships without a piston magnet, meaning it cannot host reed or electronic switches unless upgraded to an -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 90 mm |
| Adjustable range | 80 – 90 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Set precise lower limits for a 128.1 kg vertical lift rig, leveraging the 10 mm adjustment window to perfect the drop distance during initial commissioning.
Adjust the extend position on a heavy conveyor sorting gate by up to 10 mm on-site, ensuring smooth deflection of large product loads without part changes.
Remember that a plain double-acting cylinder drifts when air is lost or the valve centers—the fixed bumper only decelerates near the end of travel and acts as a mechanical stop, not a lock. For suspended loads, integrate an external rod lock or pilot-operated check valve. Confirm your requirements for the PT3/8 port, female M14x1.5 rod-end thread, and the absence of a magnet (S) or male rod thread (B) before ordering.
Quick checklist
Turning the external M20x1.5 screw mechanically shortens the extend end-position from the 90 mm maximum down to 80 mm. It sets the stop without changing the force, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.