
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-100S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X90-100S is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M20x1.5) screw, you can dial the extend position from 0 to 90 mm directly on the machine, avoiding part swaps during changeovers. Retract remains full length. The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit.
The -S code denotes a built-in piston magnet for AirTAC reed or electronic switches. End shock is handled by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 90 mm |
| Adjustable range | 0 – 90 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 90 mm via the M20x1.5 screw to set precise press depths for varying bearing sizes without changing tooling.
Install the compact riveted body in tight axial spaces where longer cylinders fail to fit, securing 25 mm rod travel against workpieces.
If your application requires less force, the smaller SDAJ63 provides 1558.6 N at 0.5 MPa; for heavier demands, the SDAJ100 pushes 3927 N at 0.5 MPa. This model is ideal for setups needing frequent on-site stroke tuning.
Confirm the 80 mm bore, 90 mm stroke, 100 mm window, and PT3/8 port. The -S magnet supports position sensing, while the female M14x1.5 rod-end thread (male M22x1.5 optional) handles the 25 mm piston rod. Note that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa.
The R (M20x1.5) screw shortens the extend stop by up to 100 mm, giving a usable extend range of 0-90 mm. The -S code indicates a built-in piston magnet for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.