verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10S

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 90 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke90 mm
  • Adjustable range80–90 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$161.41 $168.91Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10S

The AirTAC SDAJ80X90-10S is a compact double-acting double-rod cylinder built for tight axial spaces, featuring an external M20x1.5 adjustment screw that lets you dial the extend stop down from 90 mm to 80 mm directly on the machine. The short riveted body saves valuable mounting depth where a round-body or profile cylinder will not fit.

A fixed NBR bumper at each end handles end-of-stroke deceleration, though it is not an adjustable air cushion or a mid-stroke lock. This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. Operating pressure spans 0.15 to 1.0 MPa, with a PT3/8 air port and a 25 mm piston rod designed to minimize side-load deflection.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10S Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke90 mm
Adjustable range80 – 90 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10S

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×90Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10S Is Used

precision_manufacturing

Press Fit Dial-In

Turn the M20x1.5 screw to shift the extend endpoint between 80 and 90 mm, finding the exact seating depth for bearings without swapping mechanical shims.

packaging

Carton Flap Folding

Adjust the 25 mm rod extension on-site to accommodate varying box heights, using the fixed NBR bumper to absorb the 2513.3 N impact at the end of travel.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10S the Right Cylinder?

This SDAJ80X90-10S is ideal for operators who need precise 80 to 90 mm extend tuning during frequent setup changeovers.

Remember that a plain cylinder does not hold its load if air is lost or the valve is centered; the piston drifts and the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, 90 mm maximum stroke, 10 mm window, PT3/8 port, -S magnet, and female M14x1.5 rod-end thread.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 80–90 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10S FAQ

The external R (M20x1.5) screw mechanically shortens the extend stop from 90 mm down to 80 mm without changing the output force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X90-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.