
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10SB is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X90-10SB is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop between 80 and 90 mm on-site. Retract travel remains full length.
This thin riveted-body design saves axial mounting depth where round-body or profile cylinders cannot fit. It includes a built-in piston magnet for AirTAC reed or electronic switches and a male M22x1.5 piston rod end. End shock is managed by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 90 mm |
| Adjustable range | 80 – 90 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M22x1.5 rod endpoint on-site to accommodate varying pallet heights during line format changes.
Size both ways using 0.5 MPa push figures: stepping down to SDAJ63 yields 1558.6 N, while the SDAJ100 bore provides 3927 N. Choose this unit when setups require on-machine stroke tuning during frequent changeovers.
Confirm your parameters: 80 mm bore, 90 mm max stroke, 10 mm adjustment window, PT3/8 port, -S magnet for solid-state or reed sensing, and -B male M22x1.5 rod thread. A plain cylinder drifts on air loss or valve centering since the fixed bumper only decelerates near the end and the adjuster acts as a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa.
The M20x1.5 screw shortens the extend endpoint from the 90 mm maximum down to 80 mm without changing the force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.