
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X90-20B is a compact double-acting double-rod cylinder built for on-site extend positioning. An external M20x1.5 adjuster screw lets you dial the forward stop anywhere between 70 and 90 mm, eliminating the need for shims or part swaps during changeovers.
This 80 mm bore unit features a male M22x1.5 piston rod thread and a PT3/8 air port. Its short riveted body saves valuable axial mounting depth where larger profile or round-body cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 90 mm |
| Adjustable range | 70 – 90 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dials in the extend position on the machine via the M20x1.5 screw, avoiding teardown when switching between product families on a 90 mm stroke.
Fits into shallow machine frames using its short riveted body while delivering enough thrust to seat heavy mechanical components.
When sizing this 80 mm bore model, evaluate your force requirements both ways.
Choose this configuration if your fixture requires precise 70-90 mm extend tuning during setup. It includes the -B option for a male M22x1.5 rod end and has a 20 mm adjustment window. Remember that a plain cylinder does not hold position on air loss or valve centering; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 3518.6 N. The theoretical maximum push is 513 kgf at 1.0 MPa.
The external M20x1.5 screw shortens the extend stop by up to 20 mm, providing a usable forward range of 70 to 90 mm. This SKU includes the -B option, meaning the 25 mm piston rod features a male M22x1.5 thread. It has no magnet, so sensing is not supported.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.