
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-30 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X90-30 is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M20x1.5) screw, you can dial the forward end-position anywhere between 60 and 90 mm directly on the machine, avoiding part swaps during changeovers.
The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke, though it is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to an -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 90 mm |
| Adjustable range | 60 – 90 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 60-90 mm extend stop on heavy press operations to accommodate varying insert depths without swapping tooling.
Rapidly reconfigure extend positions during product changeovers on high-mix assembly lines using the M20x1.5 adjuster screw.
Choose this unit if your fixture setup requires frequent on-site stroke tuning across that 60-90 mm window. Confirm the PT3/8 port, the female rod-end thread, and the 30 mm adjustment range fit your spatial limits. Remember that a plain SDAJ does not hold position on air loss or valve centring; the fixed bumper only decelerates near the end. For suspended loads, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The external M20x1.5 screw shortens the extend stop by up to 30 mm, yielding a usable 60-90 mm forward range. This specific SKU has no piston magnet; you must select an -S variant to use reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.