verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-50B

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-50B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 90 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke90 mm
  • Adjustable range40–90 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$142.34 $149.84Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-50B

The AirTAC SDAJ80X90-50B is a compact double-acting double-rod cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop directly on your machine. You can tune the outward stroke anywhere between 40 and 90 mm without shims or part changes, making it ideal for high-mix setups.

This variant utilizes a male M22x1.5 piston rod thread and a PT3/8 air port. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S option.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-50B Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-50B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke90 mm
Adjustable range40 – 90 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-50B

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×90Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-50B Is Used

precision_manufacturing

Heavy Press Tooling

Dial the extend stop from 40 to 90 mm to test different material thicknesses on a forming line without swapping out the entire actuator assembly.

vertical_align_center

Vertical Lift Stops

Set precise lower limits for lifting fixtures, taking advantage of the 128.1 kg vertical lift capacity while relying on external check valves for safety.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-50B the Right Cylinder?

Choose this male-thread rod model for tooling attachments requiring an external M22x1.5 stud.

Operators needing frequent on-machine stroke tuning between 40 and 90 mm will benefit from the external R screw. Keep in mind that a plain cylinder does not hold its load if air pressure drops or the valve centers; the piston will drift. For suspended or vertical loads, integrate an external rod lock or a pilot-operated check valve, as the fixed NBR bumper only decelerates near the end of travel and acts as a mechanical stop, not a brake.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–90 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-50B FAQ

At 0.7 MPa, push increases to 3518.6 N. The theoretical maximum push is 513 kgf at 1.0 MPa.

The M20x1.5 screw shortens the extend stop by up to 50 mm, allowing an adjustable range of 40 to 90 mm. It functions purely as a mechanical stop and does not alter the force. It cannot hold a load without air pressure; use an external rod lock for load holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-50B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X90-50B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.