Airtac SED Double Rod Cylinder SED50X450S
The AirTAC SED Double Rod Cylinder SED50X450S is a genuine double-acting ISO 15552 double-rod cylinder: a Ø20mm piston rod exits BOTH ends of the Ø50mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 450mm, PT1/4 ports, adjustable cushioning.
- BoreØ50 mm
- Stroke450 mm
- Port sizePT1/4
- ConfigurationDouble rod
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SED Double Rod Cylinder SED50X450S
The AirTAC SED50X450S is a double-acting, double-rod profile cylinder built to the ISO 15552 interface. Because a 20mm rod exits both end covers, the annulus area is identical on extend and retract. This gives you exactly 825 N of output force in both directions at 0.5 MPa, eliminating the push-pull mismatch of single-rod units.
Fitted from the factory with a magnet (-S), the rear rod can mount a DMSE electronic sensor flag or drive a secondary mechanism while maintaining dual-side guidance. The extruded aluminum barrel contains no external tie rods. Adjustable air cushions at both ends tame the 30-800 mm/s cycle speed across this 450mm stroke.
Airtac SED Double Rod Cylinder SED50X450S Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED50X450S |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 450 mm |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED50X450S
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED50X450S Is Used
Multi-Spindle Drill Head
Drives a dual-ended machining head delivering 825 N both ways, using the rear rod to index a secondary drill fixture without rotational skew.
Dual-Side Transfer Pusher
Synchronizes a conveyor diverting arm with 1154 N at 0.7 MPa, utilizing the through-rod to actuate a parallel belt lane simultaneously.
Web Tensioning Braker
Regulates continuous material tension on a converting line, applying equal pull and release forces via the twin M16x1.5 rod ends.
Is the Airtac SED Double Rod Cylinder SED50X450S the Right Cylinder?
For 0.5 MPa requirements, the adjacent SED40 yields 528 N both ways, while the SED63 provides 1402 N. Choose this 50mm bore when you need 825 N of equal bidirectional force to drive a cam or tooling from the rear rod without rotational deflection. At 450mm, the extended rod length demands external linear guides to prevent side-load wear on the seals. To replace an ISO 15552 unit, match the 50mm bore, 450mm stroke, PT1/4 port, and mounting from the Basic, FA, LB, TC, FTC, TCM1, or TCM2 set. Note that air loss will cause drift; use a BSED rod lock for fail-safe holding.
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED50X450S FAQ
The double-rod design yields equal force in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
The through-rod provides dual-side guidance to prevent rotation and allows the rear rod end to mount a sensor flag or secondary cam, while maintaining a true ISO 15552 footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED50X450S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.