
The AirTAC SEJ Adjustable Cylinder SEJ100X1000-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø100mm unit covers an effective stroke of 990–1000mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X1000-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10 mm adjustable retract stroke. A rear stop screw lets you dial the effective stroke precisely from 990 to 1000 mm.
This unit uses a Ø25 mm rod with an M20x1.5 thread and PT1/2 ports. Adjustable air cushions at both ends absorb kinetic energy near stroke termination. This SKU lacks a magnet, so it does not support CMSE or DMSE position sensors without modification. The extruded aluminum barrel ensures ISO 15552 dimensional interchangeability without external tie rods.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X1000-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 1000 mm |
| Adjustment window | 10 mm (990–1000 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×1000 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Drives a 1000 mm material pusher at 3681 N. The 10 mm stop-screw window fine-tunes the retract end to align the material stop precisely during commissioning.
The adjustable end-position absorbs minor mechanical variance over the long stroke.
Opens and closes heavy industrial machine doors. The double-rod design provides symmetrical speed and force, while the 10 mm trim sets the exact closed position.
Choose this 100 mm bore if your machine requires 3681 N of both-way force at 0.5 MPa and needs to trim the retract end within a 990-1000 mm window. If you need less force, the 80 mm bore provides 2268 N; if you need more, stepping up to the 125 mm bore yields 5734 N. For a fixed 1000 mm end position without the adjustment screw, a standard SED cylinder is simpler. This SEJ does not hold position on air loss; use an external rod lock for fail-safe holding. At 1000 mm, the extended rod is prone to side loads; always use external guides to prevent binding.
Quick checklist
A mechanical stop screw on the rear rod shortens the retract stroke over a 10 mm window. You can set the effective stroke anywhere from 990 to 1000 mm. Lock the screw after setting your desired end position.
Because it is a double-rod cylinder, force is equal in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.