verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ100X175-30S

The AirTAC SEJ Adjustable Cylinder SEJ100X175-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø100mm unit covers an effective stroke of 145–175mm without changing cylinders. Force is equal in both directions.

  • BoreØ100 mm
  • Nominal stroke175 mm
  • Adjust window30 mm
  • Effective stroke145–175 mm
  • Port sizePT1/2
  • CushionAdjustable, 36 mm
$219.37 $226.87Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ100 stroke, mounting and version on one page All SEJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ100X175-30S

The AirTAC SEJ100X175-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. You can dial the retract end-position from 145mm up to 175mm, allowing precise on-machine fine-tuning without swapping hardware. Because a rod exits both ends, the annulus area is identical in both directions, yielding an equal force of 3681 N each way at 0.5 MPa.

This 100mm bore unit uses a PT1/2 port and a Ø25mm rod with an M20x1.5 thread. The rear rod mechanically stops the stroke via a lockable set screw, and the extruded aluminum barrel incorporates field-adjustable air cushions at both ends to manage deceleration. The included -S magnet enables position detection with CMSE reed or DMSE electronic sensors.

Airtac SEJ Adjustable Cylinder SEJ100X175-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ100X175-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ100 mm
Nominal stroke175 mm
Adjustment window30 mm (145–175 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressureForce (both directions)
0.5 MPa3682 N
0.7 MPa5154 N
Max (@1.0 MPa)751 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ100X175-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
100Bore size in mm.
×175Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ100X175-30S Is Used

precision_manufacturing

Press Stroke Calibration

Dial in the exact 145-175mm pressing depth on an assembly press.

swap_horiz

Multi-Part Changeover

Switch a material handling line between different pallet heights. The 30mm retract window lets operators reposition the stroke rapidly without changing the cylinder mounting.

science

Prototype Positioning

Trial different end-stops for a testing fixture. The double-rod design ensures the 3681N extend and retract forces remain identical, while the screw allows iterative depth adjustments.

Is the Airtac SEJ Adjustable Cylinder SEJ100X175-30S the Right Cylinder?

Verify the 30mm adjustment window covers your required end-position range, giving an effective 145-175mm stroke. If you need less force, the 80mm bore provides 2268 N at 0.5 MPa; if you need more, the 125mm bore yields 5734 N at 0.5 MPa. If your application never requires stroke changes, a fixed-stroke SED cylinder simplifies the setup.

Remember that the adjustable stop screw and air cushions only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock. This cylinder is dimensionally interchangeable per ISO 15552, so match the bore, stroke, PT1/2 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) for direct replacements.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ100X175-30S FAQ

The -30 designation means the retract stroke can be adjusted up to 30mm via a mechanical stop screw on the back rod. For this 175mm nominal stroke model, the effective stroke range is 145mm to 175mm. You set the required end-position and lock the screw in place.

Because it is a double-rod cylinder, the force is equal in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ100X175-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ100X175-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.