
The AirTAC SEJ Adjustable Cylinder SEJ100X175-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø100mm unit covers an effective stroke of 125–175mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X175-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm adjustable stroke window. A rear stop screw lets you dial the retract end from 125mm up to 175mm, enabling precise on-machine end-position tuning without hardware changes.
This extruded aluminum profile cylinder includes a built-in magnet for position sensing. It operates at 30-800 mm/s and provides field-adjustable air cushions at both ends to decelerate loads near stroke end. The PT1/2 ports and M20x1.5 rod thread match standard ISO 15552 dimensions, while the rear rod can carry a cam or flag for external control logic.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X175-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 175 mm |
| Adjustment window | 50 mm (125–175 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivers 5153 N at 0.7 MPa to seat bearings, using the 50mm window to fine-tune the 125-175mm press depth during commissioning.
Equal force both ways lets a conveyor lift mechanism handle varying part heights, dialing the stroke to match each new product run.
Use the rear stop screw to test optimal clamping distances on a fixture before locking it down for production.
Verify the 50mm adjustment window covers your required 125-175mm range before ordering. If your application needs less force, the 80mm bore provides 2268 N both ways at 0.5 MPa; if you need more, the 125mm bore yields 5734 N at 0.5 MPa. If exact positioning is not required, a fixed-stroke SED avoids the adjustment mechanism entirely. Remember that the air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock. Match your replacement by bore, stroke, 50mm window, PT1/2 port, and magnet.
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 50mm window. You can set the effective stroke anywhere from 125mm to 175mm, then lock it after finding the exact end position.
Because it is a double-rod cylinder, force is equal in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.