
The AirTAC SEJ Adjustable Cylinder SEJ100X200-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø100mm unit covers an effective stroke of 180–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X200-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20mm retract adjustment window, yielding an effective stroke range of 180-200mm. A rod exits both ends, ensuring the annulus area remains identical for equal force and speed in both directions—delivering 3681 N each way at 0.5 MPa. The included -S magnet supports CMSE reed and DMSE electronic sensors for precise end-position detection.
You dial in the retract end via a mechanical stop screw on the back rod, locking it after setting the exact machine position. The extruded aluminum barrel omits external tie rods, and field-adjustable air cushions at both ends decelerate the 25mm rod near stroke end. It operates at 30-800 mm/s with PT1/2 ports and M20x1.5 rod threads.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X200-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 20 mm (180–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 180-200mm stroke to match varying die heights during press setup, using the 5153 N both-way force at 0.7 MPa to actuate lifting arms.
Fine-tune the exact end-stop during initial machine commissioning, locking the back-rod screw once the 3681 N positioning mark is verified.
Adjust the retract position on the fly to handle different package sizes on a conveyor diverter, maintaining equal push and pull force.
Verify that the 20mm adjustment window covers your required end-position variance. If sizing force, the 80mm bore delivers 2268 N at 0.5 MPa both ways, while stepping up to the 125mm bore yields 5734 N. This 100mm bore provides 3681 N at 0.5 MPa and 5153 N at 0.7 MPa, with a maximum 751 kgf at 1.0 MPa. If your stroke is fixed and no fine-tuning is needed, a standard SED double-rod cylinder is sufficient. Note that the air cushion and stop screw only set the mechanical end and decelerate near stroke end; they do not hold position on air loss, so use an external rod lock for fail-safe holding. The ISO 15552 dimensions make it a direct dimensional replacement when matching the 200mm stroke, PT1/2 port, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
A stop screw on the back rod lets you mechanically dial the retract stroke over a 20mm window. The effective stroke range is 180-200mm, which you lock in place after setting the exact end position.
Because it is a double-rod cylinder, force is equal both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.