
The AirTAC SEJ Adjustable Cylinder SEJ100X200-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø100mm unit covers an effective stroke of 150–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X200-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, yielding equal force in both directions at 3681 N each way at 0.5 MPa. By turning the stop screw on the back rod, you can dial the retract end anywhere within an effective 150 to 200 mm range. This allows precise end-position tuning directly on the machine without swapping hardware.
Because it is a profile cylinder, the extruded aluminum barrel omits external tie rods for a clean ISO 15552 dimensionally interchangeable footprint. The unit includes a -S magnet for position sensing and field-adjustable air cushions at both ends to manage deceleration near the stroke limits.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X200-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 50 mm (150–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 150-200 mm retract position during stamping press commissioning, using the 50 mm window to match varying die heights while applying 3681 N of both-way force.
Accommodate different pallet profiles on a conveyor line by adjusting the stop screw up to 50 mm, providing a rigid 5153 N @0.7 MPa halt without changing the cylinder body.
Fine-tune the retract stroke to perfectly align a robotic pick-and-place handoff point, using the equal push and pull forces to ensure consistent part transfer.
Verify the 50 mm adjustment window covers your positioning range. If you need less force, the adjacent 80 mm bore delivers 2268 N each way at 0.5 MPa; if you require more power, the 125 mm bore provides 5734 N each way at 0.5 MPa. For a fixed end position that never changes, a standard SED double-rod cylinder is sufficient. When replacing an ISO 15552 unit, match the 100 mm bore, 200 mm stroke, PT1/2 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Note that the plain SEJ cylinder does not hold position on air loss. The adjustable air cushion and mechanical stop screw decelerate the load and set the end point, but they do not function as a fail-safe rod lock. For secure holding, consider an external braking device.
Quick checklist
A stop screw on the rear protruding rod lets you mechanically shorten the retract stroke by up to 50 mm. The effective stroke range is 150 to 200 mm, which you set and lock during machine commissioning.
Because the rod exits both ends, the annular area and force are identical in both directions. It generates 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.