
The AirTAC SEJ Adjustable Cylinder SEJ100X250-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø100mm unit covers an effective stroke of 150–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X250-100S is a double-acting, double-rod ISO 15552 profile cylinder with a 100mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 3681 N each way at 0.5 MPa. You can dial the retract end-position from 150mm up to 250mm to perfectly match your machine stop.
The mechanism relies on a stop screw on the back rod; set your position then lock it down. The extruded aluminum barrel has no external tie rods. It includes field-adjustable air cushions at both ends to decelerate heavy loads near stroke end, and the built-in magnet (-S) works with CMSE reed and DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X250-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 100 mm (150–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 3681 N at 0.5 MPa, this cylinder dials its retract stroke up to 100mm to accommodate varying die heights during quick-change tooling setups.
Tune the ejection length from 150 to 250mm on the fly.
Use the 100mm window to micro-adjust the pressing depth during commissioning. The M20x1.5 rod handles high axial loads while finding the exact position.
Verify this 100mm bore provides the right force, delivering 3681 N at 0.5 MPa. If you need less force, step down to the 80mm bore (2268 N). If you need more, the 125mm bore offers 5734 N. The 100mm adjustment window is ideal for prototyping or accommodating part height changeovers without swapping hardware.
If your end-position never changes, a fixed-stroke SED is sufficient. Note that a plain SEJ does not hold position on air loss; the cushion and stop screw decelerate and set the mechanical end but do not lock the rod. For fail-safe holding, use an external rod lock. When replacing an ISO 15552 cylinder, match the bore, stroke, port PT1/2, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 100mm. For a 250mm nominal stroke, the effective retract range is 150 to 250mm. You dial it in during commissioning and lock the screw.
Because it is a double-rod cylinder, force is equal in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.