
The AirTAC SEJ Adjustable Cylinder SEJ100X250-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø100mm unit covers an effective stroke of 210–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X250-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable stroke window. A rod exits both ends, yielding identical annular areas so the output force is perfectly balanced at 3681 N each way at 0.5 MPa. By turning the stop screw on the back rod, you can dial the retract end position anywhere within an effective 210 to 250 mm range without swapping hardware.
This extruded aluminum barrel design includes field-adjustable air cushions at both ends to decelerate the 25mm rod near stroke limits. Equipped with a standard magnet, it supports CMSE reed and DMSE electronic sensors for position feedback. The PT1/2 porting and M20x1.5 rod thread match standard ISO 15552 mounting dimensions.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X250-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 40 mm (210–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 40mm retract window to perfectly match material thickness changes on a press brake, using the 5153 N both-way force at 0.7 MPa to position the stop accurately.
Adjust the stroke on the fly to handle varying pallet sizes on a packaging line, leveraging the equal double-rod force to push heavy loads smoothly without asymmetric speed.
Fine-tune the clamping end-position during commissioning to accommodate different workpiece heights, locking the back-rod stop screw once the optimal 210-250mm position is found.
Verify the 40mm adjustment window covers your machine's required end-position range. If you need less force, the 80mm bore delivers 2268 N at 0.5 MPa; if scaling up, the 125mm bore provides 5734 N at 0.5 MPa. For fixed-position applications without fine-tuning needs, a standard SED cylinder is sufficient. Remember that the adjustable cushion and mechanical stop screw only set the end position and decelerate the load; they do not hold position on air loss, so an external rod lock is required for fail-safe holding.
Because the 250mm stroke exceeds 300mm? No, but at 250mm you should still ensure external guides manage side loads to protect the 25mm rod. To guarantee a direct ISO 15552 replacement match, confirm the 100mm bore, 250mm stroke, 40mm window, PT1/2 port, and your specific mounting choice from the available Basic, FA, LB, TC, FTC, TCM1, or TCM2 options.
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke within a 40mm window. This means your effective stroke range is 210mm to 250mm. You set the exact end position during commissioning and lock it in place.
Because the rod exits both ends, the force is identical in both directions. It generates 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.