
The AirTAC SEJ Adjustable Cylinder SEJ100X30-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø100mm unit covers an effective stroke of 10–30mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X30-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, yielding identical annular areas so output force is equal in both directions at 3681 N each way at 0.5 MPa. The retract stroke dials from 10mm up to 30mm via a stop screw on the back rod.
This extruded aluminum barrel design omits external tie rods and includes field-adjustable air cushions at both ends. The integrated magnet (-S) supports CMSE reed and DMSE electronic sensors for precise position feedback, while the M20x1.5 rod thread handles high thrust loads.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X30-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 30 mm |
| Adjustment window | 20 mm (10–30 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10-30mm retract window to precisely strike a 100mm metal fitting, utilizing the 5153 N both-way force at 0.7 MPa for consistent forming.
Quickly adjust the mechanical stop to accommodate different plastic mold heights on a single machine base without swapping out the entire cylinder hardware.
Use the 20mm fine-tune window during commissioning to find the exact 100mm-bore clamping pressure point, then lock the back-rod stop screw for repeatable runs.
Verify the 20mm adjustment window covers your required end-position variance; this 100mm bore delivers 3681 N both ways at 0.5 MPa. If your process needs less force, the 80mm bore provides 2268 N; if you require more, the 125mm bore offers 5734 N. For fixed-retract applications without fine-tuning, a standard SED double-rod cylinder suffices. Remember, the adjustable cushion decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, specify an external rod lock. When replacing an ISO 15552 unit, match the 100mm bore, 30mm nominal stroke, PT1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke within a 20mm window. The effective stroke range is 10mm to 30mm. You dial the end position to suit your machine, then lock the screw in place.
Because it is a double-rod cylinder, the force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.