verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ100X30-30S

The AirTAC SEJ Adjustable Cylinder SEJ100X30-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø100mm unit covers an effective stroke of 0–30mm without changing cylinders. Force is equal in both directions.

  • BoreØ100 mm
  • Nominal stroke30 mm
  • Adjust window30 mm
  • Effective stroke0–30 mm
  • Port sizePT1/2
  • CushionAdjustable, 36 mm
$181.88 $189.38Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ100 stroke, mounting and version on one page All SEJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ100X30-30S

The AirTAC SEJ100X30-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window, allowing the retract end position to be dialed in precisely from 0 to 30 mm. A rod exits both ends, ensuring the annulus area remains identical for equal force and speed in both directions. It delivers 3681 N of thrust and pull each way at 0.5 MPa.

This 100 mm bore unit uses a PT1/2 port and a Ø25 mm rod with an M20x1.5 thread. The integrated magnet (-S) supports CMSE reed and DMSE electronic sensors for position feedback. Field-adjustable air cushions at both ends manage deceleration near the stroke limits without acting as a mechanical lock.

Airtac SEJ Adjustable Cylinder SEJ100X30-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ100X30-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ100 mm
Nominal stroke30 mm
Adjustment window30 mm (0–30 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressureForce (both directions)
0.5 MPa3682 N
0.7 MPa5154 N
Max (@1.0 MPa)751 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ100X30-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
100Bore size in mm.
×30Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ100X30-30S Is Used

precision_manufacturing

Press Fit Tuning

Dial in the exact 0-30 mm insertion depth for bearing bushings on an assembly press, using the 5153 N both-way force to seat parts without over-stressing the housing.

swap_horiz

Product Changeover

Quickly readjust the end-stop for varying carton heights on a packaging line, shifting the mechanical position without swapping out the entire cylinder hardware.

settings

Gripper Jaw Calibration

Set the precise jaw closure distance during robotic gripper commissioning, relying on the equal push/pull annulus area to maintain stable clamping pressure.

Is the Airtac SEJ Adjustable Cylinder SEJ100X30-30S the Right Cylinder?

The 30 mm adjustment window on this SEJ100 unit is ideal for fine-tuning short-stroke clamping or press motions during commissioning. If 3681 N at 0.5 MPa is excessive for your payload, step down to the 80 mm bore (2268 N both ways); if you need heavier pressing, step up to the 125 mm bore (5734 N). For fixed-stroke tasks without end-position tuning, a standard SED cylinder suffices. Note that this cylinder does not hold position on air loss; use an external rod lock for fail-safe holding. As a dimensionally interchangeable ISO 15552 cylinder, confirm your replacement matches the 100 mm bore, 0-30 mm effective range, PT1/2 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ100X30-30S FAQ

A stop screw on the back rod mechanically shortens the retract stroke over a 30 mm window, allowing the effective stroke to be set anywhere from 0 to 30 mm. You lock the screw in place after finding the exact end position for your machine cycle.

Because it is a double-rod cylinder, the force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ100X30-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ100X30-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.