
The AirTAC SEJ Adjustable Cylinder SEJ100X300-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø100mm unit covers an effective stroke of 280–300mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X300-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions and you get equal force and speed extending and retracting—about 3681 N each way at 0.5 MPa. The retract end houses a mechanical stop screw on the back rod, letting you dial in the end position precisely from 280mm to 300mm without swapping hardware.
This 100mm bore unit uses a PT1/2 port and a Ø25mm rod with an M20x1.5 thread. Because it is an ISO 15552 extruded profile cylinder, it is dimensionally interchangeable with any standard metric unit. It includes field-adjustable air cushions at both ends to decelerate the load near the stroke ends. Note that this SKU lacks a magnet, so it will not work with CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X300-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 300 mm |
| Adjustment window | 20 mm (280–300 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×300 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 5153 N of equal both-way force at 0.7 MPa, this cylinder sets and releases heavy stamping dies. The 20mm retract adjustment lets you dial in the exact 280-300mm closure height during tooling changeovers.
Use the 3681 N both-way thrust to halt heavy pallets on a conveyor. The adjustable back rod stop lets you fine-tune the gate projection by 20mm to accommodate different pallet thicknesses without moving the mount.
During equipment setup, the 100mm bore provides high force to push heavy fixtures. The 20mm stroke window allows technicians to set the precise end-of-travel position on the machine frame before locking the stop screw.
The 20mm adjustment window is ideal for fine-tuning a 300mm end position during machine commissioning or matching a hard stop exactly. If you need less force, stepping down to the 80mm bore gives 2268 N at 0.5 MPa both ways. If you need more thrust, the 125mm bore provides 5734 N at 0.5 MPa both ways. If your end position never changes, a fixed-stroke SED cylinder is sufficient and shorter.
Because the stroke is 300mm, use external guides to manage side loads and prevent rod bending. Remember that the adjustable cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock or a BSED series cylinder.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke. For this model, you can dial the retract end position up to 20mm, giving an effective stroke range of 280mm to 300mm. You lock the screw after setting your desired end position.
Because it is a double-rod cylinder, force is equal in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa. The standard operating speed range is 30-800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.