Airtac SE100 Standard Air Cylinder SE100X300
The AirTAC Airtac SE100 Standard Air Cylinder SE100X300 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 300mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke300 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X300
The AirTAC SE100X300 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
This unit features a Ø25 mm piston rod with an M20x1.5 thread, paired with field-adjustable pneumatic cushioning at both ends to soften hard end stops over the 300 mm stroke. Note that this specific SKU lacks a built-in magnet, so it does not support CMSE or DMSE position sensing without modification.
Airtac SE100 Standard Air Cylinder SE100X300 Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X300 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X300
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X300 Is Used
Palletizer Case Pusher
Uses the 3927 N push force at 0.5 MPa to positively index heavy corrugated cases onto palletizing lanes without deflection.
Injection Mold Ejector
Leverages the 300 mm stroke and adjustable end cushions to safely extract deep-cavity molded plastic parts without slamming the tailstock.
Press Brake Material Feed
Relies on the ISO 15552 profile geometry and M20x1.5 rod thread to push heavy-gauge sheet metal into a brake press with precise repeatability.
Is the Airtac SE100 Standard Air Cylinder SE100X300 the Right Cylinder?
If your application requires less force, the 80 mm bore provides 2513 N of push at 0.5 MPa, whereas stepping up to the 125 mm bore yields 6136 N for heavier loads. Because this is a standard 300 mm stroke, you can use it as a drop-in dimensional replacement for any ISO 15552 cylinder sharing the PT1/2 port and 100 mm envelope.
At 300 mm of travel, the unsupported rod length increases bending moments on the front bearing under side loads; incorporating an external guide rail is recommended to prevent premature wear. Furthermore, a standard SE cylinder does not hold its position when air is exhausted or a valve centers—the piston will drift—so integrate a BSE rod lock for fail-safe load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X300 FAQ
The SE100X300 generates 3927 N of push force and 3681 N of pull force at 0.5 MPa. At 0.7 MPa, the push force reaches 5497 N, with an absolute maximum push of 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE100X300 is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounting hardware using the PT1/2 port and standard FA or FB flanges, provided your stroke length matches the 300 mm requirement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X300
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.