verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ100X50-10

The AirTAC SEJ Adjustable Cylinder SEJ100X50-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø100mm unit covers an effective stroke of 40–50mm without changing cylinders. Force is equal in both directions.

  • BoreØ100 mm
  • Nominal stroke50 mm
  • Adjust window10 mm
  • Effective stroke40–50 mm
  • Port sizePT1/2
  • CushionAdjustable, 36 mm
$176.30 $183.80Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ100 stroke, mounting and version on one page All SEJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ100X50-10

The AirTAC SEJ100X50-10 is a double-acting, double-rod ISO 15552 profile cylinder with a 10 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the drive force is perfectly balanced at 3681 N each way at 0.5 MPa. You can dial the retract end from 40 mm up to the 50 mm nominal stroke to pinpoint a machine stop without swapping hardware.

This unit features a Ø25 mm rod with an M20x1.5 thread, PT1/2 ports, and field-adjustable air cushions at both ends to decelerate the payload near stroke end. Because this SKU lacks the -S magnet option, it does not support CMSE or DMSE position sensors. The rear stop screw mechanically sets the end position and must be locked after commissioning; it is not a fail-safe brake.

Airtac SEJ Adjustable Cylinder SEJ100X50-10 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ100X50-10
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ100 mm
Nominal stroke50 mm
Adjustment window10 mm (40–50 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressureForce (both directions)
0.5 MPa3682 N
0.7 MPa5154 N
Max (@1.0 MPa)751 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ100X50-10

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
100Bore size in mm.
×50Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ100X50-10 Is Used

tune

Welding Head Calibration

Moves a 25 mm rod to present a welding fixture, allowing operators to fine-tune the 10 mm stroke window to match electrode wear without reprogramming.

Is the Airtac SEJ Adjustable Cylinder SEJ100X50-10 the Right Cylinder?

Choose this 100 mm bore if you need 3681 N of equal bidirectional force at 0.5 MPa to drive a load while fine-tuning the final 10 mm of travel. If your process requires less force, the 80 mm bore provides 2268 N both ways. If you need to push heavier tooling, the 125 mm bore delivers 5734 N both ways at 0.5 MPa. If your end position never changes, a fixed-stroke SED avoids the adjustment mechanism entirely.

For any fail-safe load holding on air loss, add an external rod lock or choose a BSED, as the adjustable stop screw and air cushions only set the mechanical end and decelerate the stroke. To match your ISO 15552 dimensional interchangeability requirements, confirm the 50 mm nominal stroke, 10 mm window, PT1/2 port, and your preferred mounting from the SEJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ100X50-10 FAQ

A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 10 mm. For this SEJ100X50-10, the effective stroke range is 40 to 50 mm. You dial the end position during machine commissioning and lock the screw in place.

Because it is a double-rod cylinder, the force is identical in both directions. It outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ100X50-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ100X50-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.