
The AirTAC SEJ Adjustable Cylinder SEJ100X50-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø100mm unit covers an effective stroke of 40–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X50-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A rear stop screw lets you dial the retract end from 40mm to 50mm, perfect for fine-tuning a machine end position without swapping hardware.
This extruded aluminum profile cylinder includes a magnet for CMSE reed or DMSE electronic sensors. It features field-adjustable air cushions at both ends to manage deceleration near stroke limits. The PT1/2 ports and M20x1.5 rod thread match standard ISO 15552 dimensions for straightforward integration.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X50-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 10 mm (40–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 3681 N both ways, dial the 10mm stop screw to perfectly set the 40-50mm end position for seating bearings without over-traveling.
Switch between different carton heights on a packaging line by adjusting the retract end within the 10mm window instead of re-mounting hardware.
Use the equal both-way force and fine stroke adjustment to test electrode positioning on prototype sheet metal parts before finalizing the fixture.
The 10mm adjustment window is ideal if your exact retract stop needs on-site commissioning. For sizing, the 100mm bore yields 5153 N both ways at 0.7 MPa. If you need less force, the 80mm bore provides 2268 N at 0.5 MPa; if you need more, the 125mm bore provides 5734 N at 0.5 MPa. If your stroke is fixed, a standard SED cylinder suffices. Note that the air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock. Match your replacement by bore, stroke, window, PT port, and magnet.
Quick checklist
The 10mm window lets you mechanically dial the retract stroke from 40mm up to 50mm using a stop screw on the back rod, which you lock after setting your target end position.
Because the rod exits both ends, force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.