
The AirTAC SEJ Adjustable Cylinder SEJ100X50-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø100mm unit covers an effective stroke of 30–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X50-20 is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding an identical annulus area so output force is equal in both directions. You can dial the retract end up to 20 mm via a back-rod stop screw, giving an effective stroke range of 30 to 50 mm. It generates about 3681 N each way at 0.5 MPa.
This 100 mm bore cylinder runs at 30-800 mm/s and features field-adjustable air cushions at both ends to manage deceleration. It uses a PT1/2 port and a Ø25 mm rod with an M20x1.5 thread. The extruded aluminum barrel contains no external tie rods, ensuring clean ISO 15552 dimensional interchangeability.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X50-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 20 mm (30–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 20 mm retract window to match varying die heights during press tooling changeovers, using the 5153 N both-way force to shift heavy intermediate plates.
Fine-tune the 30-50 mm effective stroke on the machine to set an exact clamping force against variable part thicknesses without swapping hardware.
Set a precise mechanical end-stop for workpiece feeding, locking the back-rod stop screw after commissioning to ensure repeatable 3681 N positioning.
Confirm the 20 mm adjustment window covers your end-position tuning needs across the 30-50 mm range. If you need less force, stepping down to an 80 mm bore provides 2268 N at 0.5 MPa both ways. If you require more push, moving up to a 125 mm bore yields 5734 N at 0.5 MPa. If your stop position never changes, a fixed-stroke SED is sufficient. This SKU lacks a magnet, so position sensing via CMSE or DMSE sensors is not supported without a different option code. The adjustable cushion decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, use an external rod lock. The Ø25 rod and M20x1.5 thread handle substantial loads, but always pair this with proper external guides to prevent side-load binding.
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke over a 20 mm window. The effective stroke range is 30 to 50 mm. You dial the end position during commissioning and lock the screw in place.
Because the rod exits both ends, force is equal in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.