
The AirTAC SEJ Adjustable Cylinder SEJ100X50-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø100mm unit covers an effective stroke of 30–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X50-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20mm adjustable stroke window, yielding an effective 30-50mm stroke range. A rod exits both ends, meaning the annulus area is identical in both directions. This delivers equal force, outputting 3681 N each way at 0.5 MPa.
A stop screw on the back rod lets you mechanically dial in the retract end-position during machine commissioning without swapping hardware. The included -S magnet enables CMSE reed or DMSE electronic position sensing, while field-adjustable air cushions at both ends decelerate the 25mm rod near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X50-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 20 mm (30–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 30-50mm retract window to match new die heights during production changeover, utilizing the 5153 N both-way force at 0.7 MPa to extract and seat tooling.
Fine-tune the mechanical stop position on the fly during line commissioning, using the equal push and pull forces to halt and release heavy pallets precisely.
Adjust the end position during test rig setup to vary clamping depth, relying on the consistent 3681 N both-way output to hold test components securely.
This 100mm bore provides 3681 N both ways at 0.5 MPa (5153 N at 0.7 MPa). If your load requires less force, step down to the 80mm bore for 2268 N; if you need more push, the 125mm bore offers 5734 N. The 20mm adjustment window is ideal for precisely matching a variable stop or changeover to different part heights.
For any ISO 15552 replacement, match the 50mm nominal stroke, 20mm window, PT1/2 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. The adjustable cushion decelerates motion but does not lock; for fail-safe position holding on air loss, use an external rod lock or BSED.
Quick checklist
The 20mm adjustment window lets you mechanically shorten the retract stroke using a back-rod stop screw. The effective stroke range is 30-50mm, which you set and lock in place during machine commissioning.
Because the rod exits both ends, force is equal in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.