
The AirTAC SEJ Adjustable Cylinder SEJ100X50-20SN is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø100mm unit covers an effective stroke of 30–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X50-20SN is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so the output force is perfectly balanced at 3681 N each way at 0.5 MPa. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for position detection.
A mechanical stop screw on the back rod lets you dial the retract end over a 20 mm window, giving an effective stroke range of 30 to 50 mm. This cylinder uses NBR seals, a PT1/2 port, and a Ø25 mm rod with an M20x1.5 thread. It features field-adjustable air cushions at both ends to decelerate the load near stroke end, and its extruded aluminum barrel is dimensionally interchangeable per ISO 15552.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X50-20SN |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 20 mm (30–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 30-50 mm end position during press commissioning. The 5153 N both-way force at 0.7 MPa securely seats tooling while you lock the back-rod stop screw to match the stop precisely.
Switch carton sizes on a packaging line without swapping hardware. The 20 mm retract window lets operators adjust the folding arm height on the fly, while the equal both-way force ensures consistent folding pressure.
Probe different material heights in a lab test rig. The double-rod design guides against rotation, and the built-in magnet works with DMSE sensors to verify the adjusted end position before applying the 751 kgf maximum load.
Confirm the 20 mm adjustment window covers your positioning range before ordering. If you need less force, stepping down to the 80 mm bore gives 2268 N both ways at 0.5 MPa; if you need more, the 125 mm bore provides 5734 N. A fixed-stroke SED is sufficient if you do not need to fine-tune the end position on the machine. Remember that the air cushion and stop screw only set the mechanical end and decelerate the load; a plain SEJ does not hold position on air loss, so for fail-safe holding point to a BSED or an external rod lock. When replacing an ISO 15552 cylinder, match the 100 mm bore, 50 mm stroke, 20 mm window, PT1/2 port, and your required mounting from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The retract end has a 20 mm adjustment window via a back-rod stop screw. You can mechanically dial the effective stroke from 30 mm up to the nominal 50 mm, then lock it in place to fine-tune the machine end position.
Because a rod exits both ends, the force is equal in both directions. It generates 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.