verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ100X50-30

The AirTAC SEJ Adjustable Cylinder SEJ100X50-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø100mm unit covers an effective stroke of 20–50mm without changing cylinders. Force is equal in both directions.

  • BoreØ100 mm
  • Nominal stroke50 mm
  • Adjust window30 mm
  • Effective stroke20–50 mm
  • Port sizePT1/2
  • CushionAdjustable, 36 mm
$176.30 $183.80Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ100 stroke, mounting and version on one page All SEJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ100X50-30

The AirTAC SEJ100X50-30 is a double-acting, double-rod ISO 15552 profile cylinder with a 30mm adjustable stroke window, yielding a 20-50mm effective stroke range.

You dial in the exact retract end-position using a stop screw on the back rod, then lock it down—a major advantage for machine commissioning. This extruded aluminum barrel skips external tie rods entirely, carries adjustable air cushions at both ends over 36mm, and uses a PT1/2 port with a Ø25 rod.

Airtac SEJ Adjustable Cylinder SEJ100X50-30 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ100X50-30
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ100 mm
Nominal stroke50 mm
Adjustment window30 mm (20–50 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressureForce (both directions)
0.5 MPa3682 N
0.7 MPa5154 N
Max (@1.0 MPa)751 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ100X50-30

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
100Bore size in mm.
×50Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ100X50-30 Is Used

precision_manufacturing

Press Die Changeover

Dial in the 20-50mm effective stroke to match varying die heights during press tooling changeovers, leveraging the 3681 N both-way force to shift heavy platens.

straighten

Panel Edge Bending

Fine-tune the bending depth on sheet metal panels during commissioning by adjusting the retract stop screw up to 30mm without swapping hardware.

sync_alt

Conveyor Diverter Gate

Set precise diverter gate angles for different package sizes on a conveyor line, using the equal push and pull forces to ensure consistent positioning.

Is the Airtac SEJ Adjustable Cylinder SEJ100X50-30 the Right Cylinder?

Verify the 30mm adjustment window covers your positioning range; if you need less fine-tuning, a fixed-stroke SED100X50 saves complexity. If sizing force, this 100mm bore delivers 3681 N both ways at 0.5 MPa; stepping down to an 80mm bore yields 2268 N, while a 125mm bore gives 5734 N at the same pressure. Since this SKU lacks the -S magnet, you cannot mount CMSE or DMSE sensors for position feedback. Remember, the adjustable cushion and stop screw decelerate the load near stroke end but do not hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ100X50-30 FAQ

The cylinder has a 30mm adjustment window on the retract end, meaning you can dial the effective stroke from 20mm up to the nominal 50mm to perfectly match your machine's end stop.

Because the rod exits both ends, force is equal in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ100X50-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ100X50-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.