
The AirTAC SEJ Adjustable Cylinder SEJ100X50-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø100mm unit covers an effective stroke of 20–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X50-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring an adjustable stroke. A rod exits both ends, yielding identical annulus areas so that extend and retract forces match exactly at 3681 N each way at 0.5 MPa. The integrated magnet (-S) supports CMSE reed and DMSE electronic sensors for precise position detection.
A stop screw on the back rod provides a 30 mm adjustment window, letting you dial the effective retract stroke anywhere from 20 mm up to 50 mm. This mechanism is ideal for dialing in exact end positions during machine commissioning without swapping hardware. The extruded aluminum barrel contains no external tie rods, and adjustable air cushions at both ends decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X50-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 30 mm (20–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 20-50 mm clamping position on a 100-ton press during die changeover, leveraging the 5153 N both-way force at 0.7 MPa to hold the tooling securely.
Fine-tune the back-gauge stop position on a sheet metal brake, using the 30 mm retract window to match varying flange heights without reprogramming the machine.
Adjust the transfer stroke on a packaging conveyor to accommodate different pallet lengths, relying on the double-rod design for equal push and pull dynamics.
Verify the 30 mm adjustment window covers your required end-position range, giving an effective stroke of 20 to 50 mm. If you need less force, the 80 mm bore delivers 2268 N at 0.5 MPa both ways; if you need more, the 125 mm bore provides 5734 N at 0.5 MPa both ways. If your stroke never varies, a fixed-stroke SED cylinder is sufficient. For fail-safe position holding on air loss, use a BSED cylinder or an external rod lock, as the stop screw and air cushions only set the mechanical end and decelerate the load. Match your replacement by confirming the 100 mm bore, 50 mm stroke, 30 mm window, PT1/2 port, and mounting choice from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 30 mm. This gives an effective stroke range of 20 to 50 mm, which you lock in place after setting your exact end position.
Because it is a double-rod cylinder, the force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.