
The AirTAC SEJ Adjustable Cylinder SEJ100X50-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø100mm unit covers an effective stroke of 0–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X50-50S is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas and an equal force of 3681 N each way at 0.5 MPa. You can dial the retract end from 0 to 50 mm via a back-rod stop screw, providing exact end-position tuning without swapping hardware.
This 100 mm bore unit runs at 30-800 mm/s and features field-adjustable air cushions at both ends to manage kinetic energy. The included -S magnet enables position detection with CMSE reed or DMSE electronic sensors. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X50-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 50 mm (0–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 0-50 mm retract window to engage different punch heights during press brake setups, using the 5153 N both-way force to shift heavy tooling accurately.
Adjust the mechanical stop on the fly for packaging lines running mixed carton sizes, relying on the equal push and pull forces to halt the load smoothly.
Fine-tune the exact end position during machine commissioning without machining new spacers, locking the back-rod stop screw once the optimal 0-50 mm position is found.
This 100 mm bore delivers 3681 N both ways at 0.5 MPa. If your load is lighter, the 80 mm bore provides 2268 N both ways, whereas stepping up to the 125 mm bore yields 5734 N. The 50 mm adjustment window covers an effective 0-50 mm range, making it perfect for trial positioning and part-height changeovers. If your end position never varies, a fixed-stroke SED is sufficient.
For a direct ISO 15552 replacement, match the 50 mm stroke, 50 mm window, PT1/2 port, and your required mounting. Note that the adjustable air cushion and stop screw decelerate the load near stroke end but do not hold position on air loss; for fail-safe holding, use an external rod lock or BSED.
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 50 mm. The effective stroke range is 0-50 mm. You set the precise end position on the machine and lock the screw in place.
Because the rod exits both ends, the force is identical in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.