verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ100X500-20

The AirTAC SEJ Adjustable Cylinder SEJ100X500-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø100mm unit covers an effective stroke of 480–500mm without changing cylinders. Force is equal in both directions.

  • BoreØ100 mm
  • Nominal stroke500 mm
  • Adjust window20 mm
  • Effective stroke480–500 mm
  • Port sizePT1/2
  • CushionAdjustable, 36 mm
$311.96 $319.46Save 2% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ100 stroke, mounting and version on one page All SEJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ100X500-20

The AirTAC SEJ100X500-20 is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas and equal force in both directions, delivering 3681 N each way at 0.5 MPa. The extruded aluminum barrel contains no external tie rods, ensuring clean, dimensionally interchangeable ISO 15552 mounting.

A mechanical stop screw on the back rod provides a 20 mm adjustment window, allowing you to dial the retract end from 480 mm up to the nominal 500 mm. This SKU lacks a magnet, so it does not support CMSE or DMSE position sensing. Field-adjustable air cushions at both ends decelerate the load near stroke end, but this mechanism is not a lock and cannot hold position on air loss.

Airtac SEJ Adjustable Cylinder SEJ100X500-20 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ100X500-20
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ100 mm
Nominal stroke500 mm
Adjustment window20 mm (480–500 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressureForce (both directions)
0.5 MPa3682 N
0.7 MPa5154 N
Max (@1.0 MPa)751 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ100X500-20

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
100Bore size in mm.
×500Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ100X500-20 Is Used

precision_manufacturing

Automated Press Fine-Tuning

Dialing in the exact 480-500 mm clamping position on an automated press during commissioning, utilizing the 3681 N both-way force to secure sheet metal without re-machining hard stops.

swap_horiz

Packaging Line Changeover

Adjusting the retract stroke on a packaging line to handle different carton heights, using the 20 mm window to rapidly set new end positions while the equal double-rod force manages the transfer.

Is the Airtac SEJ Adjustable Cylinder SEJ100X500-20 the Right Cylinder?

Confirm the 20 mm adjustment window covers your required end-position range; if you need more than 20 mm of travel variation, select a larger adjustment suffix. At 0.5 MPa, this 100 mm bore generates 3681 N both ways. If you need less force, the 80 mm bore provides 2268 N; if you need more, step up to the 125 mm bore for 5734 N. For fail-safe load holding on air loss, use an external rod lock or a BSED unit instead of relying on the cushion. Because the 500 mm stroke is long, external guides are recommended to prevent side-loading damage to the rod seals. If you never need to fine-tune the end position, a fixed-stroke SED is sufficient. When replacing an ISO 15552 cylinder, match the 100 mm bore, 500 mm nominal stroke, PT1/2 port, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ100X500-20 FAQ

A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 20 mm. This gives an effective stroke range of 480 to 500 mm, allowing you to fine-tune the end position on the machine and lock it in place without changing hardware.

Because a rod exits both ends, the force is identical in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ100X500-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ100X500-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.