
The AirTAC SEJ Adjustable Cylinder SEJ100X550-100SFA is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø100mm unit covers an effective stroke of 450–550mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X550-100SFA is a double-acting, double-rod ISO 15552 profile cylinder with a 100 mm bore and a 550 mm nominal stroke. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at about 3681 N each way at 0.5 MPa. The retract end features a mechanical stop screw providing a 100 mm adjustment window, allowing you to dial the effective stroke down to 450 mm for exact positioning.
This FA-mounted unit includes a magnet for CMSE or DMSE sensors and uses PT1/2 ports. Adjustable air cushions at both ends decelerate the 25 mm rods near stroke end. Because the total stroke is 550 mm, external guide rails are recommended to prevent side-load sagging on the extended rod.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X550-100SFA |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 550 mm |
| Adjustment window | 100 mm (450–550 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×550 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Use the 5153 N retract force and 100 mm stop window to fine-tune the pressing depth of a 550 mm stroke assembly press without swapping mechanical spacers.
Adjust the retract end from 450 to 550 mm to quickly reconfigure a part ejection station for different product heights while maintaining equal pushing and pulling force.
Set a precise mechanical stop on a conveyor sorting gate, using the 100 mm window to match the exact reject position for various package lengths.
Verify the 100 mm adjustment window covers your positioning range, letting you set the retract stop anywhere between 450 and 550 mm. If you need less force, stepping down to a bore 80 yields 2268 N at 0.5 MPa; if your application requires more power, a bore 125 provides 5734 N at 0.5 MPa. If the end position never changes after commissioning, a fixed-stroke SED cylinder is sufficient.
This FA foot-mount cylinder is dimensionally interchangeable per ISO 15552. Remember that the adjustable air cushion and mechanical stop screw only set the end position and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock or a BSED series cylinder.
Quick checklist
The retract end has a mechanical stop screw with a 100 mm adjustment window. You can dial the effective stroke down from the nominal 550 mm to a minimum of 450 mm to fine-tune the end position on the machine.
Because the rod exits both ends, force is equal in both directions. It generates 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.