
The AirTAC SEJ Adjustable Cylinder SEJ100X60-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø100mm unit covers an effective stroke of 30–60mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X60-30S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical extend and retract forces of 3681 N each way at 0.5 MPa. It features a 30 mm adjustable stroke window, meaning the effective retract travel can be mechanically dialed from 30 mm up to the 60 mm nominal length.
A stop screw on the back rod provides this mechanical end-position tuning, which is ideal for precise machine commissioning. Because the annulus area is symmetrical, speed and force remain balanced in both directions. The included -S magnet enables position sensing with CMSE reed or DMSE electronic switches.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X60-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 60 mm |
| Adjustment window | 30 mm (30–60 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 30 to 60 mm clamping depth on stamping presses, utilizing the 5153 N both-way force at 0.7 MPa to hold heavy dies securely during tool changes.
Adjust the mechanical stop on the fly to match varying pallet thicknesses in packaging lines, relying on the equal push and pull forces for smooth transitions.
Fine-tune the actuation end-point of heavy conveyor routing gates during commissioning, locking the back-rod stop screw once the precise package redirect angle is found.
Verify that the 30 mm adjustment window covers your required end-position variance. If your application needs less force, stepping down to the 80 mm bore provides 2268 N both-way at 0.5 MPa; if you need more power, the 125 mm bore offers 5734 N both-way at 0.5 MPa. If exact positioning is not required, a fixed-stroke SED cylinder is sufficient.
The standard SEJ does not hold position on air loss; the adjustable air cushion at both ends decelerates the load near stroke end but acts as neither a lock nor a brake. For fail-safe holding, consider an external rod lock. This model is dimensionally interchangeable per ISO 15552 with a PT1/2 port and M20x1.5 rod thread.
Quick checklist
The 30 mm adjustment window allows you to mechanically dial the retract stroke from 30 mm up to the nominal 60 mm. You set the exact end-position via a stop screw on the back rod and lock it in place.
Because the rod exits both ends, force is equal in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.