
The AirTAC SEJ Adjustable Cylinder SEJ100X600-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø100mm unit covers an effective stroke of 500–600mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X600-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. A rod exits both ends, meaning the annular area is identical in both directions, yielding an equal force of 3681 N each way at 0.5 MPa (5153 N at 0.7 MPa). You can mechanically dial the retract end from 500mm up to the full 600mm nominal stroke using the back-rod stop screw, perfect for dialing in an exact end position during machine commissioning.
This bore 100mm cylinder uses a PT1/2 port, a Ø25mm rod with an M20x1.5 thread, and includes a magnet for CMSE or DMSE sensors. The extruded aluminum barrel contains no external tie rods, and adjustable air cushions at both ends decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X600-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 600 mm |
| Adjustment window | 100 mm (500–600 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 500-600mm retract position on a 100-ton press to set precise die clearance, using the 5153 N both-way force to hold the tooling firmly.
Securely clamp long extrusion profiles at a variable stop point, leveraging the equal double-rod force and external guides to handle the 600mm stroke without side-load binding.
Quickly reposition the mechanical stop for different part heights on a machining line, shifting the retract end within the 100mm window without swapping hardware.
This 100mm bore provides 5153 N of both-way force at 0.7 MPa. If your application needs less force, the 80mm bore yields 3175 N at 0.7 MPa; if you need more, the 125mm bore provides 8028 N. Because the effective stroke is 500-600mm, confirm this 100mm adjustment window covers your exact positioning range. If you require a fail-safe position hold on air loss, note the air cushion and stop screw only set the mechanical end and decelerate near stroke end; they are not a brake. For that, use an external rod lock or BSED. Since the stroke is 600mm, external guides are highly recommended to prevent side-loading on the extended rod. If you do not need stroke variability, a fixed-stroke SED is sufficient. When replacing an ISO 15552 cylinder, match the 100mm bore, 600mm stroke, PT1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 100mm window. You can dial the effective stroke from 500mm up to the nominal 600mm, then lock it in place for precise end-position tuning.
Because it is a double-rod cylinder, the force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.