
The AirTAC SEJ Adjustable Cylinder SEJ100X75-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø100mm unit covers an effective stroke of 65–75mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X75-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window, yielding an effective 65 to 75mm travel range. A rear stop screw lets you dial in the exact retract position without swapping hardware.
This 100mm bore actuator omits external tie rods for a clean extruded aluminum barrel and includes a magnet for CMSE or DMSE sensors. The field-adjustable air cushions at both ends decelerate the 25mm rods near stroke end, while the PT1/2 ports handle high flow for 30-800 mm/s speeds.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X75-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 75 mm |
| Adjustment window | 10 mm (65–75 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 65-75mm end position when seating bearings or rivets, using the 5153 N both-way force to press consistently without over-traveling.
Quickly readjust the 10mm retract window on a packaging line to accommodate different carton heights, avoiding the need to physically remount the cylinder.
Use the back-rod stop screw to fine-tune the clamping end-point on a machining fixture, locking the setting precisely once the optimal position is found.
Confirm the 10mm adjustment window covers your end-position tolerance needs; if you need a wider dial-in range, consider an SEJ with a larger adjustment suffix. For sizing neighbors: a 80mm bore provides 2268 N both-way force at 0.5 MPa, while stepping up to a 125mm bore yields 5734 N. If you only need a fixed 75mm stroke without position tuning, a standard SED cylinder is sufficient. Remember, the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, specify an external rod lock. This cylinder is dimensionally interchangeable per ISO 15552.
Quick checklist
The 10mm adjustment window allows you to mechanically shorten the retract stroke from 75mm down to 65mm via a stop screw on the back rod, which is then locked in place.
Because it is a double-rod design, force is equal in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.