Airtac SE100 Standard Air Cylinder SE100X75
The AirTAC Airtac SE100 Standard Air Cylinder SE100X75 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 75mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke75 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X75
The AirTAC SE100X75 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering 3927 N of push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing the standardized ISO 15552 mounting interface for universal hardware interchangeability.
This 100mm bore unit utilizes a PT1/2 port and a Ø25 mm piston rod with an M20x1.5 thread, providing robust resistance against side loading. The field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, protecting machinery from harsh impacts. Note this specific SKU lacks the -S magnet, so it does not support CMSE or DMSE position sensing without modification.
Airtac SE100 Standard Air Cylinder SE100X75 Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X75 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X75
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X75 Is Used
Injection Mold Clamping
Provides 3927 N of push at 0.5 MPa to secure heavy injection mold halves within a 75mm stroke, leveraging the adjustable cushion to soften rapid closure.
Metal Stamping Ejection
Exerts up to 801 kgf at 1.0 MPa to knock heavy stamped metal blanks out of progressive dies, utilizing the rigid Ø25 mm rod for side-load durability.
Pallet Flattening
Presses warped pallet boards flat prior to automated wrapping, using the tie-rod-free extruded profile to mount closely alongside the conveyor structure.
Is the Airtac SE100 Standard Air Cylinder SE100X75 the Right Cylinder?
Selecting the SE100X75 is optimal when your application requires substantial thrust within a short 75mm stroke. If 3927 N of push at 0.5 MPa exceeds your requirement, stepping down to the 80mm bore yields 2513 N, saving space and air volume. Conversely, if you need greater force, the 125mm bore provides 6136 N at 0.5 MPa. Because this is a standard double-acting cylinder, it cannot hold a load if air pressure is lost; for dead-load holding, consider the BSE rod lock variant. As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, matching the exact 100mm bore, 75mm stroke, PT1/2 port, and standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X75 FAQ
At 0.5 MPa, this 100mm bore cylinder provides 3927 N of push (extend) force and 3681 N of pull (retract) force. At 0.7 MPa, the push force reaches 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, the SE100X75 is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the 100mm bore, 75mm stroke, PT1/2 port, and standard mounting dimensions without altering your existing machine hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.