
The AirTAC SEJ Adjustable Cylinder SEJ100X75-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø100mm unit covers an effective stroke of 25–75mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X75-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring an adjustable 50mm retract window. A back-rod stop screw lets you dial the effective stroke down from 75mm to 25mm, providing exact end-position tuning during machine commissioning without swapping hardware. Because a rod exits both ends, the annular area is identical in both directions, yielding equal force of 3681N each way at 0.5MPa.
This extruded aluminum barrel unit includes a -S magnet for CMSE reed or DMSE electronic sensors. It features field-adjustable air cushions at both ends to decelerate the load near the stroke ends. Note that the stop screw and cushions only set the mechanical end and deceleration; they do not hold position on air loss. For fail-safe holding, an external rod lock is required.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X75-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 75 mm |
| Adjustment window | 50 mm (25–75 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 25-75mm stroke to precisely set the closing height on a 5153N press die during commissioning, locking the back-rod screw once the gap is perfect.
Adjust the retract end on the fly to accommodate different carton sizes on a packaging line, using the equal both-way 3681N force to push and pull folders securely.
Fine-tune the mechanical stop position for varying part lengths on a heavy conveyor, relying on the 25mm to 75mm effective stroke window for exact placement.
This 100mm bore delivers 5153N at 0.7MPa. If your application needs less force, the 80mm bore provides 2268N at 0.5MPa; stepping up to the 125mm bore yields 5734N at 0.5MPa. The 50mm adjustment window is ideal for precisely matching variable stop distances or changeover to different part heights. If you do not need on-the-fly stroke tuning, a fixed-stroke SED100X75 is sufficient. Ensure your ISO 15552 replacement matches the PT1/2 port, M20x1.5 rod thread, and preferred mounting from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
The SEJ100X75-50S has a 50mm adjustment window. You turn a stop screw on the back rod to mechanically shorten the retract stroke, giving an effective stroke range of 25-75mm. You lock the screw after setting the exact end position.
Because it is a double-rod cylinder, the force is identical in both directions: 3681N at 0.5MPa, 5153N at 0.7MPa, and a maximum of 751kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.