
The AirTAC SEJ Adjustable Cylinder SEJ100X80-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø100mm unit covers an effective stroke of 60–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X80-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20 mm adjustable stroke window. A rod exits both ends, meaning the effective retract stroke can be dialed from 60 mm up to 80 mm.
A stop screw on the back rod mechanically sets the precise end position, which you lock in place after fine-tuning. This 100 mm bore variant uses a PT1/2 port, a 25 mm rod with an M20x1.5 thread, and includes a magnet for CMSE or DMSE sensors. The extruded aluminum barrel omits external tie rods, and the field-adjustable air cushion at both ends decelerates the load near the stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X80-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 20 mm (60–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 60-80 mm retract window to match varying metal stamping die heights, using the 5153 N both-way force to clamp parts securely.
Fine-tune the end stop on a sealing head during carton size changeovers, locking the back rod screw once the crush force is set.
Micro-adjust the stroke end during sheet metal bending trials to dial in the exact 60-80 mm flange dimension before final lockout.
Confirm this 20 mm adjustment window covers your required 60-80 mm end position. If your application needs less force, step down to the 80 mm bore which provides 2268 N both ways at 0.5 MPa. If you need more thrust, the 125 mm bore yields 5734 N both ways. A plain SEJ does not hold position on air loss; the stop screw sets the mechanical end but is not a brake. For fail-safe holding, use an external rod lock or a BSED cylinder.
If your stroke is fixed and never needs on-machine adjustment, a standard SED double-rod cylinder provides the same equal-force action without the adjustment hardware. When replacing an ISO 15552 cylinder, match the 100 mm bore, 80 mm nominal stroke, PT1/2 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
The 20 mm adjustment window lets you mechanically dial the retract stroke from a minimum of 60 mm up to the nominal 80 mm. You set the exact end position using a stop screw on the back rod and lock it in place.
Because the rod exits both ends, force is identical in both directions. It delivers 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.