
The AirTAC SEJ Adjustable Cylinder SEJ100X80-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø100mm unit covers an effective stroke of 50–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X80-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window, allowing you to dial the retract end from 50 mm up to 80 mm. A rod exits both ends, yielding identical annulus areas so the output force is perfectly balanced at 3681 N each way at 0.5 MPa.
You set the exact end-position by turning a stop screw on the back rod and locking it down, which is ideal for fine-tuning a machine stop during commissioning. The extruded aluminum barrel has no external tie rods, adjustable air cushions protect both ends, and this specific SKU ships without a magnet, meaning no CMSE or DMSE position sensing is installed.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X80-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 30 mm (50–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30 mm retract window to precisely set a lower stopping height during press tonnage calibration, leveraging the 5153 N both-way force to seat materials accurately.
Adjust the effective stroke between 50 and 80 mm to accommodate different pallet thicknesses on a packaging line, using the equal push/pull force to index heavy loads.
Fine-tune the gripping end-effector position during robotic commissioning, locking the back-rod stop screw once the optimal 50-80 mm travel is found for picking parts.
This 100 mm bore yields 3681 N both ways at 0.5 MPa and 5153 N at 0.7 MPa, with a maximum 751 kgf at 1.0 MPa. If your variable-stop changeover needs less force, step down to an 80 mm bore for 2268 N; if you need more push, the 125 mm bore provides 5734 N. Because the stroke is 80 mm, side-load stress is minimal, but always guide external loads.
The 30 mm adjustment window lets you match multiple part heights on the same line without swapping hardware. If you only need a fixed end-stop, a standard SED cylinder is simpler. Remember that the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock. Ensure your ISO 15552 replacement matches the PT1/2 port, M20x1.5 rod thread, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 30 mm. The effective stroke range is 50 to 80 mm, which you set and lock during commissioning.
Because the rod exits both ends, the force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.