verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ100X80-40S

The AirTAC SEJ Adjustable Cylinder SEJ100X80-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø100mm unit covers an effective stroke of 40–80mm without changing cylinders. Force is equal in both directions.

  • BoreØ100 mm
  • Nominal stroke80 mm
  • Adjust window40 mm
  • Effective stroke40–80 mm
  • Port sizePT1/2
  • CushionAdjustable, 36 mm
$195.64 $203.14Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ100 stroke, mounting and version on one page All SEJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ100X80-40S

The AirTAC SEJ100X80-40S is a double-acting, double-rod ISO 15552 profile cylinder with a 40mm adjustable stroke window, letting you dial the retract end from 40mm to 80mm. The back-rod stop screw lets you lock the exact end-position on the machine without swapping hardware.

It includes a magnet for CMSE reed or DMSE electronic sensors. The extruded aluminum barrel omits external tie rods, and field-adjustable air cushions at both ends decelerate the 25mm rod near stroke end.

Airtac SEJ Adjustable Cylinder SEJ100X80-40S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ100X80-40S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ100 mm
Nominal stroke80 mm
Adjustment window40 mm (40–80 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressureForce (both directions)
0.5 MPa3682 N
0.7 MPa5154 N
Max (@1.0 MPa)751 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ100X80-40S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
100Bore size in mm.
×80Nominal stroke length in mm.
-40Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ100X80-40S Is Used

precision_manufacturing

Press Die Changeover

Dial the 40-80mm retract stop to match varying die heights during press setup, using the 3681 N both-way force to shift heavy lower bolsters precisely.

straighten

Sheet Metal Flanging

Fine-tune the bending depth on a flanging station by adjusting the back-rod stop screw, locking the exact 40-80mm position for consistent panel forming.

sync_alt

Pallet Stopper Alignment

Adjust the stroke window on the fly to index pallets of different widths, letting the double-rod equal-force output halt 1000kg loads smoothly.

Is the Airtac SEJ Adjustable Cylinder SEJ100X80-40S the Right Cylinder?

The 40mm adjustment window is ideal for prototyping or dialing in a precise 40-80mm end stop. If you need less force, the 80mm bore delivers 2268 N both ways at 0.5 MPa; for heavier demands, the 125mm bore provides 5734 N at 0.5 MPa. If your stroke is fixed, a standard SED avoids the extra length.

The plain SEJ does not hold position on air loss; use an external rod lock for fail-safe holding. For ISO 15552 replacement, match the 100mm bore, 80mm stroke, PT1/2 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (40mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 40mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ100X80-40S FAQ

A stop screw on the rear rod mechanically shortens the retract stroke over a 40mm window. You can dial the effective stroke from 40mm up to the nominal 80mm, then lock it down for precise machine positioning.

Because the double-rod design creates equal annulus area, force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ100X80-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ100X80-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.