
The AirTAC SEJ Adjustable Cylinder SEJ100X80-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø100mm unit covers an effective stroke of 30–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X80-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A stop screw on the back rod lets you dial the retract end from 30 mm up to the nominal 80 mm, perfect for dialing in a precise end position directly on the machine during commissioning. Because a rod exits both ends, the annulus area is identical in both directions, yielding an equal force of 3681 N each way at 0.5 MPa.
This extruded-aluminum profile cylinder includes a -S magnet for CMSE reed or DMSE electronic sensors and PT1/2 ports. The field-adjustable air cushion at both ends decelerates the 25 mm rod near stroke ends, but it is not a mechanical lock. For fail-safe position holding on air loss, an external rod lock is required.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X80-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 50 mm (30–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50 mm retract window to match varying die heights, using the 5153 N both-way force to consistently lift and lower heavy stamping plates.
Fine-tune the stopping arm position for different pallet widths on the fly, leveraging the equal push and pull force to handle heavy loads smoothly.
Adjust the retract distance precisely during R&D trials to test part engagement depths without swapping out the entire actuator hardware.
Confirm the 50 mm adjustment window covers your required positioning range, giving an effective 30-80 mm stroke. If you need less force, the adjacent 80 mm bore delivers 2268 N both ways at 0.5 MPa; if you need more, the 125 mm bore provides 5734 N at 0.5 MPa. If you do not need variable end-positioning, a fixed-stroke SED is sufficient. For an ISO 15552 replacement, match the 100 mm bore, 80 mm stroke, 50 mm window, PT1/2 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
The mechanical stop screw on the back rod provides a 50 mm adjustment window. You can dial the effective retract stroke from 30 mm up to the nominal 80 mm to fine-tune the end position.
Because the rod exits both ends, force is equal in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.