
The AirTAC SEJ Adjustable Cylinder SEJ32X175-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø32mm unit covers an effective stroke of 155–175mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X175-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window, allowing you to dial the retract end from 155mm to 175mm. A rod exits both ends, yielding identical annulus areas and an equal drive force of 345 N each way at 0.5 MPa.
This unit includes a magnet (-S) for CMSE reed or DMSE electronic sensors. The extruded aluminum barrel design omits external tie rods for a clean profile, and field-adjustable air cushions at both ends decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X175-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 175 mm |
| Adjustment window | 20 mm (155–175 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 155-175mm retract end-stop when switching a packaging machine between different carton sizes, utilizing the 345 N both-way force.
Adjust the stroke on the fly to clamp varying part heights at a precise end position without swapping out the entire cylinder hardware.
Use the 20mm adjustment window to test and set exact feed positions on a new product line before locking the back-rod stop screw permanently.
If your positioning range falls within 155-175mm, this 32mm bore cylinder delivers 345 N both ways at 0.5 MPa. For lighter duties, the next bore down is unavailable in this series, but stepping up to a 40mm bore yields 528 N at 0.5 MPa. If your end position never varies, a fixed-stroke SED is sufficient. For fail-safe holding on air loss, use an external rod lock, as the cushion only decelerates. Match ISO 15552 replacements by bore, stroke, PT1/8 port, and mounting.
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 20mm. The effective stroke range is 155mm to 175mm, which you set and lock during commissioning.
Because the rod exits both ends, force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.