Airtac SE32 Standard Cylinder SE32X175
The AirTAC Airtac SE32 Standard Cylinder SE32X175 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke175 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X175
The AirTAC SE32X175 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It yields a 402 N push at 0.5 MPa, making it suitable for lower-force assembly tasks. The extruded aluminum barrel lacks external tie rods, yielding a smooth, corrosion-resistant exterior that mounts flush against machine frames.
This unit features field-adjustable air cushioning at both ends to soften end-of-stroke impacts, set via a screw rather than a fixed bumper. This specific SKU is built without a position sensor magnet, relying on external physical stops or separate detection if needed.
Airtac SE32 Standard Cylinder SE32X175 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X175 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X175
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X175 Is Used
PCB Drill Clamping
Provides 402 N of push force to secure thin PCB panels during high-speed drilling and routing operations.
Carton Flap Folding
Uses the 175 mm stroke to extend and fold lightweight cardboard flaps on continuous flow packaging lines.
Lab Dispenser Actuation
Drives precision fluid dispense heads where a compact, smooth profile body is required to fit tight lab enclosures.
Is the Airtac SE32 Standard Cylinder SE32X175 the Right Cylinder?
Delivering 402 N push at 0.5 MPa, this 32 mm bore is the smallest standard size. If your application needs less force, you must step out of the SE series, but if you require more power, stepping up to the 40 mm bore provides 628 N push. Because the stroke is 175 mm, the 12 mm rod and M10x1.25 thread handle moderate side loads, but an external guide is recommended for heavy lateral forces. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other profile cylinders sharing the PT1/8 port and standardized mounting interface. Note that the adjustable cushion decelerates the piston near stroke end but does not lock or hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X175 FAQ
The SE32X175 generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It uses a PT1/8 port.
Yes, the SE32X175 is dimensionally interchangeable per ISO 15552, meaning it shares the standard mounting footprint and 32 mm bore spacing for direct drop-in retrofitting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.