verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X175-30

The AirTAC SEJ Adjustable Cylinder SEJ32X175-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø32mm unit covers an effective stroke of 145–175mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke175 mm
  • Adjust window30 mm
  • Effective stroke145–175 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$75.59 $83.09Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X175-30

The AirTAC SEJ32X175-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This provides an equal force of 345 N each way at 0.5 MPa, preventing directional thrust imbalance.

You can mechanically dial in the retract end position from 145mm to 175mm using the back-rod stop screw. Once the exact machine stop is set, you lock it in place. This cylinder uses a PT1/8 port, carries a Ø12 mm rod with an M10x1.25 thread, and includes field-adjustable air cushions at both ends to manage deceleration.

Airtac SEJ Adjustable Cylinder SEJ32X175-30 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X175-30
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke175 mm
Adjustment window30 mm (145–175 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X175-30

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×175Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X175-30 Is Used

swap_horiz

Packaging Changeover

Fine-tune the mechanical end position during format size changes on packaging lines, adjusting the stroke window without swapping out cylinder hardware.

precision_manufacturing

Assembly Clamp Positioning

Commission clamps on automated assembly fixtures by micro-adjusting the back-rod stop screw to match varying part heights perfectly.

Is the Airtac SEJ Adjustable Cylinder SEJ32X175-30 the Right Cylinder?

Verify the 30mm adjustment window covers your required end-position range. If 345 N (0.5 MPa) is insufficient, stepping up to the 40mm bore yields 528 N both ways. If your application only needs 345 N and a fixed stop without on-machine fine-tuning, a standard SED double-rod cylinder is enough. Note that the air cushion and stop screw only set the mechanical end and decelerate near stroke end; they do not hold position on air loss. For fail-safe holding, use an external rod lock. This ISO 15552 unit replaces any matching 32mm bore, 175mm stroke, PT1/8 port cylinder with Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X175-30 FAQ

The retract stroke is adjustable over a 30mm window. The effective stroke ranges from 145mm up to the full nominal 175mm, set via a mechanical stop screw on the back rod.

Because the rod exits both ends, force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X175-30

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X175-30 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.