
The AirTAC SEJ Adjustable Cylinder SEJ32X175-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø32mm unit covers an effective stroke of 125–175mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X175-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm adjustable stroke window. A back-rod stop screw lets you mechanically dial the retract end from 125mm up to 175mm, enabling precise on-machine end-position tuning without swapping hardware.
This 32mm bore unit runs at 30-800 mm/s with a PT1/8 port and a 12mm rod. It includes field-adjustable air cushions at both ends to manage deceleration, and the built-in magnet (-S) supports CMSE reed or DMSE electronic sensors for position feedback.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X175-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 175 mm |
| Adjustment window | 50 mm (125–175 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 125-175mm stroke range to match varying carton heights perfectly. The equal 345 N both-way force ensures consistent sealing pressure on extend and retract.
Use the back-rod stop screw to micro-adjust the retract end position during commissioning. The 12mm rod and adjustable cushions protect sensitive drill heads.
Quickly reconfigure a 125mm to 175mm reach for different product runs.
Confirm the 50mm adjustment window covers your required end-position variance, yielding an effective 125-175mm stroke. For sizing both ways: the next bore down is unavailable in this series, while stepping up to a 40mm bore provides 528 N at 0.5 MPa. If you do not need variable stops, a fixed-stroke SED is sufficient. Note that the air cushion and stop screw only set the mechanical end and decelerate near stroke end; they do not hold position on air loss. For fail-safe holding, use an external rod lock. As an ISO 15552 cylinder, it dimensionally interchanges by matching the 32mm bore, 175mm stroke, PT1/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
The retract stroke is adjustable over a 50mm window. The effective stroke range is 125mm to 175mm. You set the mechanical stop screw on the back rod and lock it in place for fine end-position control.
Because the rod exits both ends, force is identical in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.