
The AirTAC SEJ Adjustable Cylinder SEJ32X200-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø32mm unit covers an effective stroke of 100–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X200-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100 mm adjustable stroke window, letting you dial the retract end from 100 to 200 mm. This symmetric push/pull characteristic is ideal for mechanisms requiring consistent dynamics in both directions.
The stroke is set via a stop screw on the back rod, which you lock down after finding the exact end position during machine commissioning. It runs at 30-800 mm/s, uses PT1/8 ports, and carries a 12 mm rod with an M10x1.25 thread. Adjustable air cushions at both ends decelerate the load near stroke end, though this unit ships without a magnet (-S omitted), so it has no CMSE or DMSE position sensing on this SKU.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X200-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 100 mm (100–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Fine-tune the retract distance on automated grippers to perfectly phase jaw closure across varying part sizes without swapping hardware.
Dial in the exact 100-200 mm insertion depth for light-duty pin or bearing press fits, relying on the equal 345 N both-way force for controlled motion.
Adjust the retract stop on packaging conveyor diverters during product format changeovers, locking the back-rod screw at the new required height.
This 32 mm bore delivers 483 N both ways at 0.7 MPa. If you need less force, there is no smaller SEJ bore, so you must regulate pressure down. If your application exceeds this, step up to the 40 mm bore for 739 N both ways at 0.7 MPa. The 100 mm adjustment window is vast, so verify your mechanism can physically accommodate the extended back-rod length during the 100-200 mm travel range.
Because the 200 mm stroke exceeds 300 mm? No, but at 200 mm you should still ensure external guides support side loads to protect the 12 mm rod. A plain SEJ does not hold position on air loss; the stop screw only sets the mechanical end. For fail-safe holding, specify an external rod lock or a BSED series. Ensure your ISO 15552 replacement matches the 32 mm bore, 200 mm stroke, PT1/8 port, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The model has a 100 mm adjustment window, meaning you can mechanically dial the retract stroke from 100 mm up to the nominal 200 mm. You set the exact end position using the stop screw on the back rod, then lock it in place.
Because it is a double-rod cylinder, the force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.